Fuzzy SWOT-DEA Approach for Selecting Electrical Component Vendors in Offshore Structure Projects

Authors

  • Mohammad Iqbal Putra Azhari Institut Teknologi Sepuluh Nopember
  • Udisubakti Ciptomulyono Institut Teknologi Sepuluh Nopember

DOI:

https://doi.org/10.9744/jtm.23.1.9-20

Keywords:

Vendor Selection, Electrical Component, Offshore Structure Project, Fuzzy SWOT, DEA

Abstract

This study analyzes the selection of electrical component vendors in an offshore structure EPC project during the detailed engineering design (DED) and procurement stages, vendor evaluation is critical to ensuring project quality and schedule compliance. A multi-criteria decision-making approach combining the Fuzzy SWOT and data envelopment analysis (DEA) methods was employed to assess 15 electrical cable vendors bidding for Project X in an EPC company based in Jakarta. The Fuzzy SWOT method was used to qualitatively assess each vendor based on predetermined selection criteria, while DEA measured their relative efficiency quantitatively. The analysis identified two vendors, PT. STD and PT. KBL, as the most efficient with an efficiency score of 1. This integrated approach offers a robust, objective framework for vendor selection, supporting efficient procurement decisions that align with project requirements and reduce the risk of delays and quality issues in the construction phase.

References

E.W. Merrow, Industrial Megaprojects: Concepts, Strategies, and Practices for Success. Hoboken, NJ: Wiley, 2011. https://doi.org/10.1002/9781119201045

P.A. Wicaksono, I.N. Pujawan, E. Widodo, Sutrisno, and L. Izzatunnisa, “Mixed integer linear programming model for dynamic supplier selection problem considering discounts,” MATEC Web of Conferences, vol. 154, p. 01071, 2018. https://doi.org/10.1051/matecconf/201815401071

R.P. Setyono and R. Sarno, “Vendor track record selection using best worst method,” in Proc. Int. Seminar on Application for Technology of Information and Communication (ISemantic), 2018, pp. 361–366. https://doi.org/10.1109/ISEMANTIC.2018.8549711

R.B. Handfield, R.M. Monczka, L.C. Giunipero, and J.L. Patterson, Sourcing and Supply Chain Management. Boston, MA: Cengage Learning, 2010.

B. Musyahidah and I. Vanany, “Integration assessment and evaluation of supplier performance system in electricity generation company,” IOP Conf. Ser.: Mater. Sci. Eng., vol. 598, p. 012017, 2019. https://doi.org/10.1088/1757-899X/598/1/012017

E. Turban, J. Aronson, and T. Liang, Decision Support Systems and Intelligent Systems. Upper Saddle River, NJ: Prentice Hall, 2003.

H. Simon, “Decision making and organizational design,” in Organization Theory, D. S. Pugh, Ed. Great Britain: Penguin Education, 1960.

M. Rahmadani and Suparno, “Risk analysis for sustainable supplier selection,” J. Phys.: Conf. Ser., vol. 1726, p. 012005, 2021. https://doi.org/10.1088/1742-6596/1726/1/012005

U. Ciptomulyono, “Paradigma pengambilan keputusan multikriteria dalam perspektif pengembangan projek dan industri yang berwawasan lingkungan,” Pidato Pengukuhan Guru Besar dalam Bidang Ilmu Pengambilan Keputusan Multikriteria, ITS, 2010.

E. Gürel and M. Tat, “SWOT analysis: A theoretical review,” J. Int. Social Res., vol. 10, no. 51, pp. 994–1006, 2017.

P. Parthiban, H.A. Zubar, and P. Katakar, “Vendor selection problem: A multi-criteria approach based on strategic decisions,” Int. J. Prod. Res., vol. 51, no. 5, pp. 1535–1548, 2013. https://doi.org/10.1080/00207543.2012.709644

R.P. Setyono and R. Sarno, “Comparative method of supplier selection in ABC mining company,” Indones. J. Electr. Eng. Comput. Sci., vol. 19, no. 2, pp. 890–899, 2020. https://doi.org/10.11591/ijeecs.v19.i2.pp890-899

C. Revitasari and I.N. Pujawan, “Shifting orders among suppliers considering risk, price and transportation cost,” IOP Conf. Ser.: Mater. Sci. Eng., vol. 337, p. 012032, 2018. https://doi.org/10.1088/1757-899X/337/1/012032

H. Kerzner, Project Management Case Studies, 5th ed. Hoboken, NJ: Wiley, 2017. https://doi.org/10.1002/9781119389040

S.H. Amin, J. Razmi, and G. Zhang, “Supplier selection and order allocation based on fuzzy SWOT analysis and fuzzy linear programming,” Expert Syst. Appl., vol. 38, no. 1, pp. 334–342, 2011. https://doi.org/10.1016/j.eswa.2010.06.071

C. Kahraman, D. Ruan, and İ. Doğan, “Fuzzy group decision-making for facility location selection,” Information Sciences, vol. 157, pp. 135–153, 2003. https://doi.org/10.1016/S0020-0255(03)00183-X

A.F. Lumban Gaol and N.P. Negoro, “Penerapan data envelopment analysis dalam pengukuran efisiensi retailer produk kendaraan merek Toyota,” Jurnal Sains dan Seni ITS, vol. 6, no. 1, 2017. https://doi.org/10.12962/j23373520.v6i1.22309

W.W. Cooper, L.M. Seiford, and K. Tone, Data Envelopment Analysis: A Comprehensive Text with Models, Applications, References and DEA-Solver Software. 2nd ed. New York, NY: Springer, 2007.

A. Charnes, W.W. Cooper, and E. Rhodes, “Measuring the efficiency of decision making units,” European Journal of Operational Research, vol. 2, no. 6, pp. 429–444, 1978.

M.F. Anggamawarti, L.P. Alviari, Y. Sanjiwani, V.Y. Risonarta, “Quality analysis of 5.56 mm ammunition defect using Taguchi method: A review”, International Journal of Mechanical Engineering Technologies and Applications, vol. 1, no. 1, pp. 29-35, 2020.

R. Ramanathan, An Introduction to Data Envelopment Analysis: A Tool for Performance Measurement. New Delhi: Sage Publications, 2003.

Downloads

Published

2026-04-22

Issue

Vol. 23 No. 1 (2026): APRIL 2026 (SINTA 3)

Section

Articles

License

Copyright (c) 2026 Mohammad Iqbal Putra Azhari, Udisubakti Ciptomulyono

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Jurnal Teknik Mesin is publihed by the Mechanical Engineering Department, Petra Christian University, Indonesia


All articles and their contents are published and distributed under the international license of Creative Commons Attribution License (CC BY).